Short answer: LinkedIn outreach templates are short, copy-ready messages for connection requests, first messages and follow-ups. For 2027, write connection notes to fit 200 characters, the limit LinkedIn's help pages give for accounts without Premium, tie each one to a signal you can see on the profile, and ask a question before you ask for a meeting.
Key takeaways
- Write to 200 characters. LinkedIn's help pages give 200 characters for a connection note on an account without Premium and 300 with Premium (checked 18 November 2026). All ten notes here fit in 200.
- Notes are rationed. One LinkedIn help page says three personalized invitations a month without Premium, another says five. Either way, spend them on people with a visible signal.
- Signal first, template second. A post, a job change, a hiring page or a mutual connection tells you which message to send. No signal means a blank request and a better first message.
- Question before meeting. The first message after they accept asks one easy question. The meeting request comes after they answer.
Contents
- How long can a LinkedIn connection note be in 2027?
- Should you add a note or send a blank request?
- Connection request notes (10), every one under 200 characters
- First messages after they accept (6)
- Follow-ups when they go quiet (6)
- InMail messages (3)
- Replies that turn a conversation into a meeting (5)
- Two more for the connections you already have (2)
- How do the templates change for the US, the UK, the Gulf and India?
- What does a 14-day LinkedIn and email sequence look like?
- Five mistakes that get LinkedIn outreach ignored
- Who should run your LinkedIn outreach?
- Bottom line
- Sources
- FAQs
I have been on the receiving end of LinkedIn outreach for a long time: as a buyer at American Express and Amazon, and now as a founder whose inbox fills with connection requests every morning. I also run LinkedIn outreach for B2BXclusive (B2BX) clients in the US, the UK and Europe, the Middle East and India. From both sides, the same thing stands out. The requests I accept are almost never clever. They are short, and they show the sender looked at my profile for ten seconds before writing.
So this library is built around two constraints instead of around cleverness. The first is space: the note on a connection request is tiny, and smaller than most template lists assume. The second is evidence: what you can see on the other person's profile decides which message you are allowed to send. Every template below is labeled with the signal it needs. If you want the phone and email versions of the same approach, they are in our appointment setting scripts.
How long can a LinkedIn connection note be in 2027?
Plan for 200 characters. That is the limit LinkedIn's help center gives for a personalized invitation on an account without Premium, and it includes spaces and punctuation. Premium members get 300. Here is what LinkedIn's own pages say, including one place where they do not agree with each other.
| Limit | Account without Premium | Premium | Where LinkedIn says it |
|---|---|---|---|
| Characters in a connection note | 200 | 300 | Help pages on personalized invitations and on InMail versus invitations |
| Connection requests with a note per month | Three on one help page, five on another | Unlimited personalized invitations (general invitation limits can still apply) | Same two pages |
| Messages to people you are not connected to | Not available: Basic accounts can message connections only | InMail, with credits that depend on the subscription | Help page on InMail versus invitations |
| Total invitations per week | No number is published. All members are subject to limits, and a restriction typically lasts one week | Help page on reaching the invitation limit | |
How we checked this: I opened LinkedIn's three help pages on 18 November 2026 and copied the limits from them; the links are in the Sources section. The templates are my own, written for this guide and for the outreach B2BX runs for clients. I counted each connection note by hand with the placeholders in place, and every one is under 200 characters as written. Your count will change once you fill in real names, so check it before you send. LinkedIn changes these limits without notice, so look at the help pages again before you plan a campaign around them.
Two things follow from that table. If you are on a Basic account, a note is a scarce resource: three to five a month. And if you are on Premium, a note written to 200 characters still works, while one written to 300 will not fit when a colleague on a Basic account copies it. Write short once.
Should you add a note or send a blank request?
Add a note only when you can name something specific about the person. A generic note tells the reader you had nothing to say and said it anyway. Use this table to decide, and to pick the template.
| What you can see on their profile | Note or blank? | Template to use | Why |
|---|---|---|---|
| They posted or commented in the last month | Note | 1 | You can quote their own point back to them |
| New job in the last 90 days | Note | 2 | People in a new role are building their network and are often open to new contacts |
| Their company is hiring for a role you help with | Note | 3 | A job post is a public statement of a priority |
| A mutual connection you actually know | Note | 4 | Borrowed trust, as long as it is true |
| Same event, group or community | Note | 5 or 6 | Shared context is a reason to connect on its own |
| They reacted to something you posted | Note | 7 | They started the conversation |
| Company news: funding, expansion, a launch | Note | 8 | Gives you a reason for writing now |
| You emailed or called them this week | Note | 10 | Ties the channels together and shows a real person |
| Nothing: a quiet profile, right job title | Blank request, or template 9 if you are a true peer | Then 14 | Save your notes for people with a signal |
If you are not sure what counts as a signal, our guide to B2B buying signals lists eight of them and where to find each one.
Connection request notes (10), every one under 200 characters
None of these asks for a meeting. The only job of a note is to get the request accepted by showing you are a real person with a reason.
When to use it: they published a post or a comment you can refer to. Why it works: repeating their point proves you read it, which almost no one does.
Hi [First name], your post on [topic] made a point I keep repeating to my team: [their point in 5 words]. I work on the same problem from the [your angle] side. Glad to connect.
When to use it: they started a new role in the last three months. Why it works: it names the moment they are in and promises not to sell into it.
Hi [First name], congratulations on the move to [Company]. I work with [role]s in their first 90 days on [problem]. No pitch, just good to be connected while you settle in.
When to use it: their careers page or a LinkedIn job post shows a role connected to what you do. Why it works: the job post is their own description of the priority.
Hi [First name], saw [Company] is hiring [role]s. I help [type of team] get new hires productive faster with [one thing]. Thought it made sense to connect while you build the team.
When to use it: you share a connection who would vouch for you if asked. Why it works: trust transfers. Never use a name you have not spoken to.
Hi [First name], [Mutual name] and I worked together at [Company], and your name came up when we talked about [topic]. Would be good to be connected.
When to use it: you both attended a conference, webinar or meetup. Why it works: it is specific to one day and one room, so it cannot be a mass message.
Hi [First name], I was at [event] too and liked your question about [topic]. I am comparing notes with a few people who were there. Open to connecting?
When to use it: you are both active in a LinkedIn group, a Slack community or an industry association. Why it works: membership is a filter the reader already trusts.
Hi [First name], we are both in [group or community]. I read your comment on [thread] and it matched what I see with [type of client]. Happy to connect.
When to use it: they liked or commented on your post but you are not connected. Why it works: they moved first, so the request is a reply, not an approach.
Hi [First name], thanks for the comment on my post about [topic]. Your point on [their point] was better than mine. Good to be connected properly.
When to use it: the company announced funding, a new market, a product or an acquisition. Why it works: it answers why you are writing this week and asks for nothing.
Hi [First name], read about [Company]'s [expansion into Texas]. We have helped [type of company] through the same step. No ask today, just keen to follow how it goes.
When to use it: there is no signal, but you hold the same job at a similar company. Only send it if that is true. Why it works: peers connect with peers without needing a reason.
Hi [First name], I also run [function] at a [size] [industry] company. I like to stay connected with people solving the same problems. Open to it?
When to use it: one or two days after a cold email or a call. Why it works: a face and a profile make the email feel less like automation, and the last line removes pressure.
Hi [First name], I sent you a short email on [day] about [topic]. Connecting here so you can see I am a real person. No need to reply to both.
Want LinkedIn and email working as one sequence?
B2BX researches the signals, writes the notes and messages, and handles the replies across the US, UK and Europe, the Middle East and India. Book a free 30-minute strategy call and I will map the first month for your market.
30-minute call · no obligation
First messages after they accept (6)
This is where the conversation starts, and where most people ruin it with a pitch. One observation, one question, no link. Send it within a day or two of the acceptance.
When to use it: they accepted a note that mentioned a signal. Why it works: it continues the same thread and asks something they can answer from memory.
Thanks for connecting, [First name]. Your point about [topic from the note] stayed with me. One thing I am curious about: are you handling [specific part of the problem] in-house at [Company], or with outside help? Either answer is useful to me. No pitch attached.
When to use it: you connected on a hiring, funding or expansion signal. Why it works: it shows the pattern you see at similar companies and lets them say whether it applies.
Thanks for connecting, [First name]. When companies [open a second office / double the sales team], the thing that usually slips is [specific problem]. I have seen it at [type of company] more than once. Is that on your radar at [Company] yet, or already solved?
When to use it: you have a checklist, benchmark or short guide that fits their role. Why it works: it gives before it asks, and the question at the end needs one word.
Thanks for connecting, [First name]. I put together a one-page [checklist / benchmark] on [topic] for [role]s. It covers [two things it covers]. No form, no follow-up sequence. Want me to send it here?
When to use it: you sent a blank request and they accepted. Why it works: it is honest about why you connected and gives them an easy exit.
Thanks for accepting, [First name]. I should say why I reached out. I work with [type of company] on [problem in plain words], and [Company] looked like the kind of team that runs into it. I may be wrong. Is [problem] something you are dealing with this quarter, or is it someone else's desk?
When to use it: you are not sure they are the right person. Why it works: people like to be helpful, and a referral from a colleague opens the next conversation for you.
Thanks for connecting, [First name]. Quick one: who at [Company] looks after [area, e.g. outbound for the new region]? I have a short note on [specific observation] and I would rather send it to the right person than guess. If it is you, I will keep it to three lines.
When to use it: you connected as a peer and want a real exchange. Why it works: you offer your own number first, which makes it a trade and not a survey.
Thanks for connecting, [First name]. I am comparing notes with a few [role]s on one number: [metric, e.g. how many touches before a first meeting]. Ours is about [your honest figure] at the moment. Happy to share what I hear back from the others. What does yours look like?
Follow-ups when they go quiet (6)
Silence on LinkedIn usually means busy, not no. Wait four to seven days between messages and bring something new each time. The same rule drives our follow-up email templates after no response; these are the LinkedIn-sized versions.
When to use it: four to seven days after your first message. Why it works: it does not repeat the question; it offers a second way in.
[First name], a different way to ask my earlier question. Most [role]s I talk to say the hard part of [topic] is not [obvious thing] but [less obvious thing]. Does that match what you see?
When to use it: you have a relevant article, a public report or your own short write-up. Why it works: it is useful even if they never reply, which keeps the door open.
[First name], this made me think of [Company]: [link to article or report]. The part on [specific section] is the useful bit. No reply needed.
When to use it: they posted again and you left a real comment first. Why it works: the comment is public proof that you pay attention; the message follows it naturally.
[First name], I left a comment on your post about [topic], but one thing did not fit in a comment. You wrote that [their point]. How are you measuring that at [Company]? We track it by [your method] and I am not sure it is the best way.
When to use it: two messages with no reply. Why it works: it gives them a fast way to redirect you, and redirects come with a name.
[First name], I may be asking the wrong person. If [topic] sits with someone else at [Company], point me their way and I will leave you in peace.
When to use it: weeks or months later, when something changes: a new post, a new hire, company news. Why it works: the new signal is a new reason, so it does not read as chasing.
[First name], saw the news about [new signal]. Congratulations. That usually brings [specific problem] forward by a quarter or two. If it does, my earlier offer stands: [one-line offer]. If not, ignore me.
When to use it: as the last message. Why it works: it ends things politely and puts the next move with them. For email versions, see our breakup email templates.
[First name], I will stop here so I do not clutter your inbox. If [problem] becomes a priority, I am one message away. Good luck with [their current project].
InMail messages (3)
InMail lets you write to someone you are not connected to. LinkedIn describes it as a Premium feature, the number of credits depends on your subscription, and members can switch it off in their message preferences. Treat each one as scarce. An InMail has a subject line, so it behaves more like an email than a chat message; the ideas in our cold email subject lines guide apply.
When to use it: a C-level reader who will not accept requests from strangers. Why it works: one reason, one question, and it can be read in the notification preview.
Subject: [Company] and [specific topic] [First name], you said in [interview / earnings call / post] that [their stated priority]. We work on exactly that with [type of company]. One question: is [specific obstacle] slowing it down, or is that already handled? If it is not a priority, a one-word no is fine. [Your name]
When to use it: the company is hiring for a role tied to your service and the hiring manager is not a connection. Why it works: it offers a way to cover the gap while they hire, not a replacement for the hire.
Subject: While you hire the [role] [First name], saw the [role] opening at [Company]. Hiring takes time. If [the work that role would do] cannot wait, we can cover it in the meantime and hand over cleanly when your hire starts. Worth a short conversation, or is the timeline fine as it is? [Your name]
When to use it: you heard them speak but did not meet. Why it works: it refers to something they said in public and adds one thought of your own.
Subject: Your talk at [event] [First name], I was in the room for your session on [topic]. The point about [specific point] is one I have not heard anyone else make. One thing I would add from our side: [one-line observation]. Curious whether you agree. [Your name]
Replies that turn a conversation into a meeting (5)
A reply is the moment to be quick and specific. Answer what they asked in two lines, then make the next step easy. For the full set of email versions, see our meeting request email templates.
When to use it: they answer with interest but no commitment. Why it works: it gives the short version they asked for and then offers a choice of two times.
Happy to, [First name]. Short version: we [what you do in one sentence] for [type of company], so that [outcome in plain words]. It is easier to show against your setup than to describe. Would [Tuesday 3pm] or [Thursday 10am] your time suit a short call?
When to use it: they ask for a deck or a link. Why it works: it sends the information and asks one question that tells you whether this is real interest or a polite brush-off.
Of course. Here is the one page that matters: [link]. So I send the right detail next: is the bigger issue for you [option A] or [option B]?
When to use it: the timing is wrong. Why it works: it accepts the answer, asks permission for one future touch, and names when.
Understood, and thanks for telling me straight. Would it be useful if I checked back in [month], once [their stated reason, e.g. the budget cycle] is done? If the answer is no, that is fine too.
When to use it: they already use another provider or have an internal team. Why it works: it does not attack the choice; it asks about the one gap you can honestly fill.
Makes sense, most teams your size do. I am not suggesting you switch. Out of interest, is there one part, [specific gap, e.g. a new region or a second channel], where you would like a second pair of hands? If not, I will leave it there.
When to use it: they say yes to a conversation. Why it works: two times in their time zone end the back and forth, and the link is a backup, not a demand.
Great. [Tuesday 3pm] or [Thursday 10am] [their time zone] both work for me. If neither does, pick any slot here: [booking link]. I will send an invite with a two-line agenda so you know what to expect.
Two more for the connections you already have (2)
Your existing first-degree connections cost you no invitations and no notes. Most sellers ignore them.
When to use it: you connected years ago and never spoke. Why it works: it admits the gap, which is disarming, and ties the message to something current.
[First name], we connected back in [year] and I do not think we ever actually spoke. I noticed you are now [new role / working on new project]. I spend my days on [what you do] and it overlaps with [their area]. How is [specific thing] going at [Company]?
When to use it: a connection knows the person you want to reach. Why it works: the forwardable paragraph does the work for the introducer, and the last line makes it easy to decline.
[First name], a small favor. I see you are connected to [Target name] at [Company]. I would like to ask them one question about [topic]. If you are comfortable with it, here is a line you can forward: [Your name] works with [type of company] on [problem] and asked me to connect you. Worth a quick chat if [problem] is on your list. If you would rather not, no problem at all.
How do the templates change for the US, the UK, the Gulf and India?
The structure does not change: signal, question, then meeting. The tone does. This is what I adjust when we run the same campaign in different markets. It is judgment from running outreach in these regions, not a statistic.
| Market | What I change | Example adjustment |
|---|---|---|
| United States | Get to the point in the first line and offer a specific time early once they reply | Replace 'would it be useful' with 'worth a short call Thursday?' |
| United Kingdom and Ireland | Understate. Add a clear, polite way to say no, and keep superlatives out | 'I may be wrong, but' before the observation; British spelling throughout |
| UAE, Saudi Arabia, Qatar | Open with the relationship and the person, and move one step slower to the ask | Use template 4 or 5 where you can; add a line about their company's news before any question |
| India | Say plainly who you are and what you want; senior titles expect a clear reason and respond to a named reference | Lead with the mutual connection or a client type in the first sentence |
| Germany, Netherlands, Nordics | Be factual and specific; skip small talk and write formally on first contact | Replace 'curious' questions with a precise one about a process or a number |
The market pages for the US, the UK and Europe, the UAE and Middle East and India explain how we work each region across channels.
What does a 14-day LinkedIn and email sequence look like?
LinkedIn works best as one of two or three channels, not alone. This is the order I use for one prospect. The numbers in the last column are the templates above.
| Day | Channel | Action | Template |
|---|---|---|---|
| 1 | View the profile, read the last three posts, leave one real comment if there is something to say | None | |
| 2 | First cold email, tied to the same signal | See the B2B cold email templates | |
| 3 | Connection request, with a note if there is a signal | 1 to 10 | |
| 4 to 5 | First message within a day or two of acceptance | 11 to 16 | |
| 7 | Follow-up email with a new reason | Email follow-up | |
| 9 to 10 | Follow-up with a new angle or a resource | 17 or 18 | |
| 12 | Email or phone | Short email, or a call if you have a direct number | Email or call script |
| 14 | Wrong-person check or close the loop | 20 or 22 |
If they have not accepted the request by day 14, leave it pending and keep the email sequence going. More on combining channels is in our older guide to multi-channel outreach.
Five mistakes that get LinkedIn outreach ignored
- Pitching in the note. Two hundred characters cannot carry a pitch, and the reader has not agreed to hear one.
- A link in the first message. A booking link asks a stranger to do the scheduling before they care. Send it after they say yes.
- Fake signals. Praising a post you did not read is easy to spot. If there is no signal, send a blank request and use template 14.
- The same message to everyone at one company. Colleagues compare notes. Change the angle by role.
- Chasing volume. LinkedIn says all members are subject to invitation limits and that a restriction typically lasts one week. A few careful requests a day to the right people beat a blocked account.
Who should run your LinkedIn outreach?
| Your situation | Best fit | Why |
|---|---|---|
| Founder selling the first ten deals | Do it yourself, 20 minutes a day, with these templates | Your own profile and voice convert best, and you learn what buyers say |
| Sales team with reps who have time | Reps send from their own profiles; a manager reviews the first messages weekly | Keeps it personal and keeps quality from slipping |
| Team that needs meetings in a new market and has no spare hours | A managed program that runs email and LinkedIn together | The research and reply handling take more time than the sending |
| Anyone tempted by full automation on one profile | Slow down first | A restricted account stops every channel that depends on it |
B2BX runs the third row. LinkedIn sits alongside email in our multi-channel plans, which are flat monthly fees of $1,950, $3,950 and $5,950+ on the pricing page, with additional LinkedIn touches at $0.50 each as an add-on. First meetings usually arrive in two to three weeks. The lead generation service page explains what is included, and if you would rather compare providers first, start with our 12 questions to ask a lead generation agency. More playbooks are in the lead generation library.
Bottom line
LinkedIn outreach is a small-space discipline. Write the note to 200 characters, send it only when you can point to something real on the profile, ask one question after they accept, follow up two or three times with something new, and offer two times the moment they show interest. The templates are a starting point. The ten seconds you spend reading the profile are what get the request accepted.
Sources
All checked on 18 November 2026.
- Personalized invitations: up to three connection requests with a message per month, 200 characters each; Premium members can send unlimited personalized invitations: LinkedIn Help, Personalize invitations to connect.
- Basic accounts: up to five personalized invitations with a 200-character limit; Premium: unlimited notes with a 300-character limit; InMail is a Premium feature, Basic accounts can message connections only, credits depend on the subscription and members can opt out: LinkedIn Help, Differences between InMail messages and personalized invitations.
- All members are subject to invitation limits; a restriction typically lasts one week; withdrawing invitations does not remove it; no weekly number is published: LinkedIn Help, Invitation limit reached.
- B2BXclusive plans, the LinkedIn add-on and timelines: our pricing page. The templates, the signal table, the regional adjustments and the 14-day sequence are our own, written for this guide.
Rather have the notes written, sent and answered for you?
Tell me who you sell to and where. In a free 30-minute strategy call I will show you the signals we would track, the first three messages we would send and what a month of LinkedIn plus email looks like for your market.
30-minute call · no obligation
32 LinkedIn Outreach Templates
Get this guide as a printable PDF cheat sheet: the short answer and key takeaways, 5 comparison tables, 32 copy-ready templates, 8 quick answers.
Frequently asked questions
How long can a LinkedIn connection request message be?
LinkedIn's help pages give 200 characters for a personalized invitation on an account without Premium and 300 characters for Premium members (checked 18 November 2026). Spaces and punctuation count. Write to 200 so the same note works on every account, and check the count again after you fill in the names.
How many connection requests with a note can I send on a free LinkedIn account?
LinkedIn's own help pages disagree. The page on personalizing invitations says up to three connection requests with a message per month; the page comparing InMail and invitations says up to five. Premium members can send unlimited personalized invitations. Plan for three, and send blank requests to everyone else.
Should I send a LinkedIn connection request with or without a note?
Send a note when you can point to something specific: their post, a job change, a mutual connection or an event you both attended. With no signal, a blank request is more honest than a generic note, and your first message after they accept can do the work instead.
What should I say after someone accepts my LinkedIn connection request?
Thank them in a few words, mention the reason you connected, and ask one question they can answer in a line. Do not pitch or send a booking link in the first message. Once they reply, share something useful or suggest a short call with two possible times.
How many times should I follow up on LinkedIn?
Two or three follow-ups over about three weeks is a sensible limit for one person. Each follow-up should bring something new: a different angle, a useful resource or a fresh signal. End with a short message that closes the loop politely, then stop unless something changes on their side.
Can I message someone on LinkedIn without connecting?
Only with InMail, which LinkedIn describes as a Premium feature for messaging members you are not connected to. Basic accounts can message their connections only. Members can also opt out of receiving InMail in their message preferences, so a connection request is still the main route for most senders.
How many LinkedIn connection requests can I send per week?
LinkedIn does not publish a number. Its help page says all members, Basic and Premium, are subject to invitation limits, that a restriction typically lasts one week, and that withdrawing pending invitations will not remove it. Treat any weekly figure quoted elsewhere as an estimate and keep your volume modest.
Do LinkedIn outreach templates work for B2B sales in the UK, the Gulf and India?
Yes, with tone changes. UK buyers respond to understatement and a clear way to say no. In the UAE, Saudi Arabia and Qatar, open with the relationship and move slower to the ask. In India, be direct about who you are and what you want. The structure stays the same: signal, question, then meeting.




